YGE 35 LVT ESC

The YGE35 LVT ESC is the latest high quality German engineered brushless electronic speed controller for F5J powered gliders, helicopters and sports models. YGE is the most reliable brand of speed controller currently available and gives the best performance from all electric motors.

Apart from having telemetry facilities the YGE35 LVT ESC has a very powerful BEC whose output voltage is configurable between 5.5V and 8.4V. The BEC can supply 5A continuously and 10A for up to 10 seconds making it suitable for most models.

What’s new:

• “T” for Telemetry. Following protocols are currently compatible: Graupner HoTT V4, Jeti ExBUS, Multiplex Sensor BUS V2, YGE-protocol for different telemetry-connections for example via YGE TexY (Futaba, Spektrum, FrSky), MSH Brain 2 or Spirit FBL
• Firmare update capable using the USB-Adapter.
• Entirely overhauled hardware and software (32-bit).
• The PWM frequency is automatically optimised for the motor.
• Current-limitation.
• Super smooth motor startup using sinewave modulated currents.
• Adjustable HV-BEC from 5.5 to 8.4V.
• High BEC-current rating: 5A continuous / 10A peak.
• Dimensions in mm: 34 x 23 x 8
• Weight 25g with cables / 13g without.
• Basic settings via mode-setup
• BEC- and Telemetry-settings, as well as additional parameters adjustable via PC-Software using the optional USB-adapter.
• Cannot be programmed using the ProgCard 3

Use the TexY product to interface with Futaba, Spektrum and FrSky radios.

The YGE35 LVT ESC is a 35 A electronic speed control with a very powerful switch mode BEC (battery eliminator circuit) for powering the RC. The BEC can supply 5.5V to 8.4V adjustable in 0.1V steps at a current of 5 A continuously and 10 A for short periods. Adequate cooling is required for sustained running at the maximum continuous full power ESC and BEC current limits.

The YGE35 LVT has powerful braking facilities to ensure that folding props fold correctly, without over straining the gearbox.

The YGE35 LVT has an excellent helicopter governor mode allowing low and high rpm flight condition with the same pinion, allowing modern flybarless helis to benefit from the excellent low RPM capabilities of flybarless modules.

The YGE35 LVT has these benefits:

• Under voltage protection by power reduction.
• Configurable under voltage detection.
• Suitable for LiPo, LiFe, NiMh, NiCd and new battery chemistries.
• Switching BEC ensures reliable well regulated power to the RC.
• Adjustable BEC output of 5.5V to 8.4V in 0.1V increments makes it ideal for all RC setups.
• Excellent speed regulation (Governor mode).
• Soft start.
• Active free-wheel, allowing unlimited part load operation.
• Automatic or 6 step adjustable timing.
• Continuously adjustable F3A brake.
• Three step adjustable regular back EMF brake.
• Temperature and overload warning.
• Anti sparking circuit reduces connection sparks and eliminates damage.

YGE35 LVT ESC Specifications
Continuous current	35 A
Max current (10s)	45 A
Voltage range	6V – 22V (2S-6S LiPo)
BEC type	Switching (uBEC)
BEC output voltage	5.5V to 8.4V adjustable in 0.1V increments
BEC continuous current	5 A
BEC max current	10 A
Dimension	34 mm x 23 mm x 8 mm
Weight bare/inc cables	25 g / 13 g
Switching rate	8 to 16 kHz
Commutation limit	240, 000 RPM (2-Pole motors)
Programmed using	Transmitter, YGE USB Adaptor