1.50mm ID Etched PTFE (15 AWG Bondable PTFE) Pushrod Outer Tube

Low friction 1.50 mm ID PTFE tube suitable for pushrod outers on F5J models, discus launched glider and other small models. Also suitable for a large range of engineering and industrial uses.

This tubing is specially etched on the outside, making it easily bondable using many adhesives, thin CA being probably the best. Provides the lightest, easiest, most friction-free pushrod installations possible.

Can be stretched to 2 times the original length to reduce the weight per meter, and tune the inside diameter to be a perfect fit for the inner pushrod. Sold by the meter. Enter a quantity of 3 for a 3m roll.

15L Etched PTFE Tube Specification
Inside diameter	1.50 mm	0.059 in
Wall thickness	0.2 mm	0.008 in
Outside diameter	1.9 mm	0.075 in
3X Stretched ID	0.90 mm	0.035 in
Suggested inner	1mm & 1.3mm Carbon Rod	16 SWG or thinner Piano or SS wire
US size	15 AWG L type (Lightweight)
Weight per m	2.5 g per meter

Maximum 30m per order please. For more please consider purchasing a complete roll.